INON Z-330 Type2 [Options] (2024)

Strobe Dome Filter SOFT

JAN code : 4562121438651

A filter to soften strobe light and protect dome surface. Attaching this filter decreases strobe power at 0.3 EV.

[Compatible Strobe]
Z-330, D-200 (packaged in the Z-330/D-200)

[Effect on strobe power]
-0.3 EV.

Strobe Dome Filter ND

JAN code : 4562121438620

An ND filter to step down strobe output at -4EV.

[Compatible Strobe]
Z-330, D-200

[Effect on strobe power]
-4 EV.

Strobe Dome Filter [4900K]

JAN code : 4562121438637

A color filter to warm native color temperature to 4900K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4900K can have richer blue water back ground with natural color subject illuminated by a strobe.

[Compatible Strobe]
Z-330, D-200

[Color temperature]
4900K

Strobe Dome Filter [4600K]

JAN code : 4562121438644

A color filter to warm native color temperature to 4600K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4600K can have richer blue water back ground with natural color subject illuminated by a strobe.

[Compatible Strobe]
Z-330, D-200

[Color temperature]
4600K

Snoot Set for Z-330/D-200

JAN code : 4562121438996

The INON Snoot Set for Z-330/D-200 is an accessory for the INON "Z-330", "D-200" to change beam angle. The various combination of packaged parts supports 7 different beam coverage with the following effects [To block extra diffused light eliminating backscatter] / [To highlight a subject by illuminating the subject only ] / [To give a spotlight effect on a subject etc.]
The Rubber Hood is securely attached on a compatible strobe via supplied dedicated aluminum sleeve which is screwed on the Strobe Light Shade mountthread on the strobe.

INON optical cable products use multicore optical fiber cable made from more than 200 fibers providing super durability and rigid reliability with minimum bending curvature 2mm which is quite different from single core optical fiber cable.

A set of an Optical D Cable Type L with Single Hole Rubber Bush Type L and Double Hole Rubber Bush Body. The rubber bush is directly linked with an underwater housing equipped with a cable adapter of 7 mm/0.3 in. diameter.

INON [Optical D Cable Type L / Cap Set] is a key component to reliably trigger an external strobe in synch with built-in flash light.

*Use correct Optical D Cable exclusively designed for each camera system.

Z Adapter MV

JAN code : 4562121436527

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" strobe on an arm body or Direct Base III etc. via Clamp III. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide enormously comfortable strobe aiming.

Z Adapter II

JAN code : 4562121437418

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" strobe on an arm body or Direct Base III etc. via Clamp III. Metal body enhances stability of combined arm.

Direct Base III

JAN code : 4562121436541

A base adapter with aluminum alloy ball-joint. Attached on top edge of the Grip Base D4 to connect Arm Body or Z Adapter MV, or on an INON strobe as strobe adapter to lock strobe position securely by a clamp.

Z Joint

JAN code : 4562121433571

A YS Mount adapter for INON strobes to attach the strobe directly on INON Grip Base D4, Shoe Base to configure compact strobe system. Combination with INON YS Adapter enables to link a strobe to various strobe arm equipped with a ball joint.

Quick Holder Set S-Z

JAN code : 4562121439412

Strobe Light Holder LE

JAN code : 4562121435568

Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "Z-240" or "D-2000" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter MV"is necessary to use this product.

Strobe Light Holder LF

JAN code : 4562121437715

Optional product to attach one or two INON LF series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "Z-240" or "D-2000" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter II"is necessary to use this product.

Shoe Base M6

JAN code : 4562121438477

An adapter to hold a strobe atan accessory shoe of an underwater housing.

Front Cover 110

JAN code :4562121438989

Strobe Cover D/Z

JAN code : 4562121433861

A strobe cover made from neoprene as same as wet-suits for underwater use. This cover protects strobe from accidental damage during diving as well as transportation by its cushioned material. Two slits on both sides are designed for effective radiation.

Strobe Light Shade

JAN code :4562121438668

A rotatable partial light shade to prevent marine snow, flare, ghosting by not exposing suspended particles or not let strobe light shining a lens. The inner surface is attached with reflective sticker to bounce strobe light for creative lighting.

ReplacementO-ring set for the Z-330/Z-240.
INON yellow O-Rings contain lubricant in theO-ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-ring.

Special grease formulated to match INON yellowO-ring. Can also be used with conventional black O-ring.