INON Arm System [Connecting Parts] (2024)

Clamp

Connect and lock ball-joints of INON Arm series products

Base Adapter

Base adapters to attach an arm on Grip Base or DSLR housing

Joint Adapter

Joint adapters to attach INON strobe on an INON Arm series product

Light Holder

Adapters to attach LE series LED flashlight on an INON Arm series product

Adapter for Carbon Telescopic Arm

An adapter attached to a Carbon Telescopic Arm enabling to flexibly combine with a tripod system, lights, etc.

Clamp

Clamp III

JAN code : 4562121436510

The Clamp III links and locks ball-joints of an arm body, direct base or adapter each other. Ball-joint receptacles are machined lightweight aluminum alloy to satisfy highly precise and durable requirement. The handle is designed to naturally fit to fingers and made by resin casting to enhance its operability to clamp ball-joints firmly with less power and easy to loosen to adjust relative angle of combined arms.

Effective length: 36mm (1.4in)
Weight: 53g (1.9oz) [air] / approx.33g (1.2oz) [underwater]

Base Adapter

Direct Base III

JAN code : 4562121436541

Directly attached on the Grip Base D4 etc.

Attached on a housing etc.

via "M6 Plate Direct Base III"

Attached on Stick Arm etc.

via "M6 Joint"

Usable as strobe adapter for stable strobe

positioning with a clamp

The Direct Base III is a fundamental part to attach arm system. Directly attached on the Grip Base D4 / Grip Base M1 / D Holder / SD Front Mask for HERO5/6/7 / Weight Plate or via optional M6 Plate Direct Base III or M5 Plate Direct Base III on a housing or other base products. It is also possible to attach the Direct Base III on the middle of the Stick Arm or Multi Ball Arm via optional M6 Joint. The Direct Base III is attached on a strobe as well. Its ball-joint is made of metal, to provide rigid strobe positioning only by lightly fasten the Clamp III.

Full length: 45mm (1.8in)
Effective length: 32mm (1.3in)
Weight: 35g (1.2oz) [air] / approx.23g (0.8oz) [underwater]

Compatible base/housing etc.
Directly attached

Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Tripod Adapter,
SD Front Mask for HERO5/6/7, SD Front Mask STD,
SD Mount Cage for HERO3/3+/4,
SD Mount Base for TG-Tracker, SD Mount Base UWH1,
Weight Plate (Screw Type), Weight Plate (Velcro Type)

Attached via optional "M6 Plate Direct Base III"

X-2 series Housing, X1-Z/LZ/NZ Housing
Holder II, Grip+Bar III Set, Holder II Grip Set, Holder Base,
Grip+Bar I Set, Grip+Bar II Set,
Grip Base DIII w/ Rubber Grip D, Grip Base DII w/ Rubber Grip D,
Other brands' housing/arm system (*1)
(*1) Compatible with 2 x M6 screw holes with 8mm or more depth and 13mm - 28mm center-to-center distance of screw holes.

Attached via optional "M5 Plate Direct Base III"

Other brands' housing/arm system (*2)
(*2) Compatible with 2 x M5 screw holes with 6mm or more depth and 24mm - 28mm center-to-center distance of screw holes.

Compatible arm
Attached via optional "M6 Joint"

Stick Arm XS-T/SS-T/S-T/M-T/L
Multi Ball Arm S/ML/L/LL/XL (Multi Ball Arm SS is not compatible)

Compatible strobe etc.

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S

Direct Base III Options

M6 Plate Direct Base III

M5 Plate Direct Base III

M6 Joint

Washer Set (Direct Base III both sides mounting)

Multi Direct Base IIa

JAN code : 4562121437494

Installed on a grip

The Multi Direct Base IIa is a base adapter to add a ball-joint on handle of a digital SLR housing, dedicated mount of a housing or grip base for compact digital cameras to have a strobe or other lighting device via connecting arm with a clamp. This adapter is manufactured by machining corrosion resistant aluminum alloy. Its base plate has large area and is fixed by two cap screws firmly to comfortably hold heavy gears. There are 6x M6 screw holes and 4x M5 screw holes to accommodate with various housings and handles. The ball-joint is designed with hollow portion to lighten total weight.

Full length: 48mm (1.9in)
Effective length: 37mm (1.5in)
Weight: 33g (1.2oz) [air] / approx.20g (0.7oz) [underwater]
Package contents: M6 Cap Bolt x 2, M5 Cap Bolt x 2,
　　　　　　　　　　M6 Flat Washer x 2, M5 Flat Washer x 2, Allen Wrench

Compatible base/housing etc.

Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,
Grip Base DIII w/ Rubber Grip D, Grip Base DII w/ Rubber Grip D,
Holder II, Grip+Bar III Set, Holder II Grip Set, Holder Base,
Grip+Bar I Set, Grip+Bar II Set,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Tripod Adapter,
Weight Plate (Screw Type), Weight Plate (Velcro Type),
X-2 series Housing, X1-Z/LZ/NZ Housing,
Other brands' housing/arm system including Anthis, Kenko, SEA&SEA, Nauticam (*1)

(*1) INON INC. has not confirmed compatibility with specific product(s) from other manufactures. Before using, make sure to check if the product(s) from other manufactures is compatible and does not interfere other combined product(s)

Multi Direct Base II WB

JAN code : 4562121436992

Two strobes are attached

A strobe and LED flashlight are attached

The Multi Direct Base II WB has two ball-joints to have two branches of arm enabling more sophisticated lighting such as using one strobe for a subject and the other strobe for background or using a strobe for still imaging and video light for footage.
Total 10 fixing holes (M6 x 6, M5 x 4) on its base provide broad compatibility with major brands' housings/grips and attached thoroughly by two cap bolts.

Full length: 97mm (3.8in)
Effective length: 86mm (3.4in)
Weight: 56g (2.0oz) [air] / approx.33g (1.2oz) [underwater]
Package contents: M6 Cap Bolt x 2, M5 Cap Bolt x 2,
　　　　　　　　　　M6 Flat Washer x 2, M5 Flat Washer x 2, Allen Wrench

Compatible base/housing etc.

Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,
Grip Base DIII w/ Rubber Grip D, Grip Base DII w/ Rubber Grip D,
Holder II, Grip+Bar III Set, Holder II Grip Set, Holder Base,
Grip+Bar I Set, Grip+Bar II Set,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Tripod Adapter,
Weight Plate (Screw Type), Weight Plate (Velcro Type),
X-2 series Housing, X1-Z/LZ/NZ Housing,
Other brands' housing/arm system including Anthis, Kenko, SEA&SEA, Nauticam (*1)

Multi Direct Base II Long

JAN code : 4562121433618

An aluminum alloy base product to attach an arm on the Grip Base D4 or System Base II etc. Total 10 fixing holes (M6 x 6, M5 x 4) on its base provide broad compatibility with major brands' housings/grips, and attached thoroughly by two cap bolts.

Full length: 88mm (3.5in)
Effective length: 76mm (3.0in)
Weight: 46g (1.6oz) [air] / approx.28g (1.0oz) [underwater]
Package contents: M6 Cap Bolt x 2, M5 Cap Bolt x 2,
　　　　　　　　　　M6 Flat Washer x 2, M5 Flat Washer x 2, Allen Wrench

Compatible base/housing etc.

Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,
Grip Base DIII w/ Rubber Grip D, Grip Base DII w/ Rubber Grip D,
Holder II, Grip+Bar III Set, Holder II Grip Set, Holder Base,
Grip+Bar I Set, Grip+Bar II Set,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Tripod Adapter,
Weight Plate (Screw Type), Weight Plate (Velcro Type),
X-2 series Housing, X1-Z/LZ/NZ Housing
Other brands' housing/arm system including Anthis, Kenko, SEA&SEA, Nauticam (*1)

Multi Direct Base II Options

Cap Screw Set (Multi Direct Base II both sides mounting)

Direct Base YS RT

JAN code : 4562121438071

Directly attached on the Grip Base D4 etc.

Attached on "SD Mount Cage for HERO3/3+/4"

Attached on Stick Arm etc.

via "M6 Joint"

A YS Mount compatible base adapter to hold/attach an LED light, strobe or SD Mount Cage for HERO3/3+/4 via Single Light Holder LE, Single Light Holder LF or Z Joint to create simple and compact system. The YS Mount rotates 360 degree to benefit users with flexible aiming of combined lighting device.
Directly attached on the Grip Base D4/Grip Base M1/D Holder/SD Mount Cage for HERO3/3+/4/Weight Plate or via optional M6 Plate Direct Base III or M5 Plate Direct Base III on a housing or other base products. It is also possible to attach the Direct Base YS RT on the middle of the Stick Arm or Multi Ball Arm via optional M6 Joint.

Full length: 40mm (1.6in)
Effective length: 28mm (1.1in)
Weight: 27g (1.0oz) [air] / approx.10g (0.3oz) [underwater]

Compatible base/housing etc.
Directly attached

Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,Tripod Adapter,
SD Mount Cage for HERO3/3+/4,
Weight Plate (Screw Type), Weight Plate (Velcro Type)

Attached via optional "M6 Plate Direct Base III"

X-2 series Housing, X1-Z/LZ/NZ Housing
Holder II, Grip+Bar III Set, Holder II Grip Set, Holder Base,
Grip+Bar I Set, Grip+Bar II Set,
Grip Base DIII w/ Rubber Grip D, Grip Base DII w/ Rubber Grip D,
Other brands' housing/arm system (*1)
(*1) Compatible with 2 x M6 screw holes with 8mm or more depth and 13mm - 28mm center-to-center distance of screw holes.

Attached via optional "M5 Plate Direct Base III"

Other brands' housing/arm system (*2)
(*2) Compatible with 2 x M5 screw holes with 6mm or more depth and 24mm - 28mm center-to-center distance of screw holes.

Compatible arm
Attached via optional "M6 Joint"

Stick Arm XS-T/SS-T/S-T/M-T/L
Multi Ball Arm S/ML/L/LL/XL (Multi Ball Arm SS is not compatible)

Direct Base YS

JAN code : 4562121438064

Joint Adapter

Z Adapter MV

JAN code : 4562121436527

Installed on a strobe

An adapter to attach Z-330/D-200/S-2000/Z-240/D-2000 strobe or Double Light Holder LE/Strobe Light Holder LE on an arm body or Direct Base III etc. via clamp. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide comfortable strobe aiming.

Full length: 76mm (3.0in)
Effective length: 58mm (2.3in)
Weight: 35g (1.2oz) [air] / approx.16g (0.6oz) [underwater]

Compatible strobe/light etc.

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220F, Z-220F, Z-220S,
Double Light Holder LE, Quad Light Holder LE, Strobe Light Holder LE,
SD Front Mask for HERO5/6/7, SD Front Mask STD,
SD Mount Cage for HERO3/3+/4,
SD Mount Base for TG-Tracker, SD Mount Base UWH1

Z Adapter II

JAN code : 4562121437418

Attached on the Grip Base D4 vertically

Attached on the Grip Base D4 horizontally

Installed on a strobe

The Z Adapter II is an optional product to add INON Arm II compatible ball-joint on a strobe, light holder or base. An arm product is combined in combination with a clamp. Metal body enhances stability of combined arm. It is useful when handling long arm via this accessory as the Z Adapter II attached on the Grip Base D4/M1 will have its ball-joint vertically or horizontally.

Effective length: 59mm (2.3in)
Weight: 58g (2.0oz) [air] / approx.36g (1.3oz) [underwater]

Compatible arm/base etc.

Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Tripod Adapter

Compatible strobe etc.

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220F, Z-220F, Z-220S
Double Light Holder LE, Quad Light Holder LE, Strobe Light Holder LE,
Strobe Light Holder LF

Z Joint

JAN code : 4562121433571

Installed on a strobe

A joint adapter to attach Z-330/D-200/S-2000/Z-240/D-2000 strobe on YS type arm head including Grip Base D4/Grip Base M1/D Holder/Shoe Base II/YS Adapter MV/YS Arm/Direct Base YS RT etc.
Also usable to attach an LED flashlight product on YS type arm head in combination with Double Light Holder LE/Quad Light Holder LE/Strobe Light Holder LE/Strobe Light Holder LF.

Effective length: 26mm (1.0in)
Weight: 45.5g (1.6oz) [air] / approx.23g (0.8oz) [underwater]

Compatible strobe/light etc.

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180 (*1), D-180S,
Z-220 (*1), Z-220F, Z-220S (*1),
Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE,
Strobe Light Holder LF,
SD Front Mask for HERO5/6/7, SD Front Mask STD,
SD Mount Cage for HERO3/3+/4,
SD Mount Base for TG-Tracker, SD Mount Base UWH1

Compatible base/arm etc.

Shoe Base II, YS Adapter MV, Double YS Adapter MV, YS Adapter WB MV,
YS Adapter, YS Arm M ,YS Arm MS ,Bar Mount,
Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60,
Direct Base YS RT, Direct Base YS

(*1) There are two Arm Base design depending on production lot and only trapezoidal version can accept this product.

Rotatable YS Extension Bar

JAN code: 4562121439443

Moving patterns

Sample set-up to attach an LED torch using the Rotatable YS Extension Bar

Attached in between YS compatible adapter like INON “Shoe Base II” and strobe or LED torch to enhance flexibility of lighting thanks to its rotatable body part enabling creative and sophisticated lighting with minimum configuration.

360 degree rotatable body

Effective length :60 mm/2.4 inch
Length : 82 mm/3.2 inch
Weight : 64 g/2.3 oz(air), approx. 25 g/0.9 oz(underwater)
Compatible products :
[YS head side]
Quick Base S,Quick Base M6W,Quick Holder Set S-LE,
Quick Holder Set S-LF,Quick Holder Set S-Z, Z Joint

[YS compatible adapter side]
Shoe Base II,Direct Base YS RT,Direct Base YS,Bar Mount,
Grip Base D4, Grip Base M1, D Holder,D Holder Extension Bar,
YS Adapter MV,Double YS Adapter MV,YS Adapter WB MV,YS Adapter,
YS Arm MS,YS Arm M,Port Arm for MRS,Port Arm for UFL-MR130 EFS60

Moving patterns

Sample set-up to attach an LED torch using the Rotatable YS Extension Bar

360 degree rotatable body

Effective length : 60 mm/2.4 inch
Length : 82 mm/3.2 inch
Weight : 64 g/2.3 oz(air), approx. 25 g/0.9 oz(underwater)
Compatible products :
[YS head side]
Quick Base S,Quick Base M6W,Quick Holder Set S-LE,Quick Holder Set S-LF,Quick Holder Set S-Z,Z Joint

[YS compatible adapter side]
Shoe Base II,Direct Base YS RT,Direct Base YS,Bar Mount, Grip Base D4, Grip Base M1, D Holder,D Holder Extension Bar,YS Adapter MV,Double YS Adapter MV,YS Adapter WB MV,YS Adapter,YS Arm MS,YS Arm M,Port Arm for MRS,Port Arm for UFL-MR130 EFS60

Click to check example set-up

YS Adapter MV

JAN code : 4562121436534

Installed on a strobe

Installed on a fashlight

An adapter to attach YS joint equipped product such as INON Z-22 strobe, SEA&SEA YS series strobe, "Single Light Holder LE", "Single Light Holder LF" or" Z Joint", on an arm or "Direct Base III" via clamp. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide comfortable strobe aiming.

Full lensgth: 67mm (2.6in)
Effective length: 45.5mm (1.8in)
Weight: 20g (0.7oz) [air] / approx.7g (0.2oz) [underwater]

Compatible strobe/light etc.
Directly attached

INON Z-22, SEA&SEA YS series strobe
(excluding particular model such as YS-300, YS-350 etc.)
Single Light Holder LE, Single Light Holder LF

Attached via optional "Z Joint"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180 (*1), D-180S,
Z-220 (*1), Z-220F, Z-220S (*1)
Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE,
Strobe Light Holder LF

Attached via optional "YS Adapter Fixing Bolt"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S

(*1) Particular production lot of "Z-220", "Z-220S", "D-180" is not compatible with the "Z Joint". Refer to "Z Joint" section for detail.

YS Adapter

JAN code : 4562121431058

An aluminum alloy adapter to attach YS joint equipped product such as INON Z-22 strobe, SEA&SEA YS series strobe, Single Light Holder LE, Single Light Holder LF or Z Joint. The SEA&SEA YS-300 and YS-350 have wider strobe adapter mount and YS Adapter is still usable for them by installing packaged O-Ring on a groove of the adapter to accommodate with the strobe adapter mount.

Full lensgth: 68mm (2.4in)
Effective length: 46mm (1.8in)
Weight: 36g (1.3oz) [air] / approx.22g (0.8oz) [underwater]

Compatible strobe/light etc.
Directly attached

INON Z-22, SEA&SEA YS Series Strobe
Single Light Holder LE, Single Light Holder LF

Attached via optional "Z Joint"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180 (*1), D-180S,
Z-220 (*1), Z-220F, Z-220S (*1)
Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE,
Strobe Light Holder LF

Attached via optional "YS Adapter Fixing Bolt"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S

(*1) Particular production lot of "Z-220", "Z-220S", "D-180" is not compatible with the "Z Joint". Refer to "Z Joint" section for detail.

Double YS Adapter MV

JAN code : 4562121436671

Set-up image

An adapter equipped with two YS type arm heads on a ball-joint to hold two strobe/LED flashlight via Z Joint or light holder. The ball-joint is made from plastic to provide flexible strobe/LED flashlight positioning without loosening a clamp.

Full lensgth: 113mm (4.4in)
Effective length: 91mm (3.6in)
Weight: 30g (1.1oz) [air] / approx.11g (0.4oz) [underwater]

Compatible strobe/light etc.
Directly attached

INON Z-22, SEA&SEA YS series strobe
(excluding particular model such as YS-300, YS-350 etc.)
Single Light Holder LE, Single Light Holder LF

Attached via optional "Z Joint"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180 (*1), D-180S,
Z-220 (*1), Z-220F, Z-220S (*1)
Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE,
Strobe Light Holder LF

Attached via optional "YS Adapter Fixing Bolt"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S

(*1) Particular production lot of "Z-220", "Z-220S", "D-180" is not compatible with the "Z Joint". Refer to "Z Joint" section for detail.

YS Adapter WB MV

JAN code : 4562121436688

Set-up image

A YS type adapter carrying double ball-joints. Strobes or LED flashlights are attached on the YS Arm compatible arm via Z Joint or light holder and on the ball-joint via clamp. The ball-joint is made from plastic to provide flexible strobe/LED flashlight positioning without loosening a clamp.

*This product is not designed to attach an extra arm. Attaching extra arm will damage the adapter itself.

Full length: 122mm (4.8in)
Effective length: 100.5mm (4.0in)
Weight: 37g (1.3oz) [air] / approx.13g (0.5oz) [underwater]

Compatible strobe/light etc.
Directly attached

INON Z-22, SEA&SEA YS series strobe
(excluding particular model such as YS-300, YS-350 etc.)
Single Light Holder LE, Single Light Holder LF

Attached via optional "Z Joint"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180 (*1), D-180S,
Z-220 (*1), Z-220F, Z-220S (*1)
Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE,
Strobe Light Holder LF

Attached via optional "YS Adapter Fixing Bolt"

Z-330, D-200, S-2000, Z-240, D-2000,
D-2000S, D-2000W/Wn, D-180, D-180S, Z-220, Z-220F, Z-220S

(*1) Particular production lot of "Z-220", "Z-220S", "D-180" is not compatible with the "Z Joint". Refer to "Z Joint" section for detail.

YS Adapter Options

YS Adapter Fixing Bolt

Z Adapter MV 1/4-20UNC

JAN code : 4562121438170

Set-up image

A ball adapter specifically designed to screw on tripod screw hole (1/4 in. 20UNC) which is generally equipped with a digital camera/underwater housing in the market. This adapter offers various applications as connecting part including attaching compact digital camera on D-SLR camera/housing or attaching on INON weight plate to use diving weight as a tripod base to hold camera system.
The ball-joint is made from plastic to provide flexible positioning without loosening a clamp to provide comfortable aiming.

Do not use this product on land to avoid damage/deformation caused by excessive load.

This product is specifically designed for tripod screw hole (1/4in-20UNC) and not compatible with Z-330/S-2000/Z-240/D-2000 strobe, and other relative products those having M6 screw hole.

Full length: 76mm (3.0in)
Effective length: 58mm (2.3in)
Weight: 35g (1.2oz) [air] / approx.16g (0.6oz) [underwater]

Z Adapter MV 1/4-20UNC Options

1/4 Male Female Tripod Screw

1/4 Male Female Tripod Screw (for Grip Base D4)

Light Holder

Single Light Holder LF

JAN code : 4562121437708

Set-up image

An optional product to attach single LF series LED flashlight on a YS type arm head. Especially for handy and compact camera system set-up with Shoe Base or Grip Base D4.

Weight: 57g (2.0oz) [air] / approx.31g (1.1oz) [underwater]

Compatible LED Light

LF1300-EWf, LF3100-EW, LF800-N, LF1100-W, LF1000-S, LF2700-W, LF1400-S

Compatible arm
Directly attached

Shoe Base,Grip Base D4,D Holder,D Holder Extension Bar,
YS Adapter MV,Double YS Adapter MV,YS Adapter WB MV,
YS Adapter,YS Am MS, YS Arm M,Bar Mount,
Port Arm for MRS,Port Arm for UFL-MR130 EFS60,
Direct Base YS RT,Direct Base YS

Strobe Light Holder LF

JAN code : 4562121437715

Set-up image

(one LF series with strobe)

Set-up image

(two LF series with strobe)

Set-up image

(two LF series)

An optional product to attach one or two LF series LED flashlight on compatible lighting arm together with Z-330/D-200/S-2000/Z-240/D-2000 strobe etc. Directly attached on a YS type arm head like Shoe Base or Grip Base D4 in combination with the Z Joint. Pairing with the Z Adapter II enables to attach on a ball-joint product with a clamp. Usable as lighting arm to hold LF series LED flashlight only as well. You can attach one LED flashlight on either side or two flashlights when using Z adapter II/Z Adapter while using Z Joint allows to hold one flashlight on either side.

Weight: 65g (2.3oz) [air] / approx.35g (1.2oz) [underwater]

Compatible LED Light

LF1300-EWf, LF3100-EW, LF800-N(*1), LF1100-W, LF1000-S, LF2700-W, LF1400-S

Compatible strobe

Z-330, D-200, S-2000(*1), Z-240, D-2000
D-2000S, D-2000W/Wn, D-180 (*2), D-180S
Z-220F, Z-220S (*2)

Compatible arm

Attached via optional "Z Joint"

Shoe Base (*3), Grip Base D4 (*3), D Holder,
D Holder Extension Bar, YS Adapter MV,
Double YS Adapter MV, YS Adapter WB MV,
YS Adapter, YS Am MS, YS Arm M, Bar Mount,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60,
Direct Base YS RT, Direct Base YS

Attached via optional "Z Adapter II" / "Z Adapter"

Arm system products equipped with a ball-joint.

(*1) LF800-N can be combined only with S-2000 strobe via this product. Any other INON strobe like Z-330, D-200, Z-240, D-2000 etc. cannot be combined with LF800-N.

(*2) There are two Arm Base design depending on production lot and only trapezoidal version can accept this product.

(*3) "Wireless Connection" is not compatible when using this product to attach an external strobe since combined LED flashlight etc. on this product may block installation/free movement of a Mirror Unit (Strobe) which is necessary for "Wireless Connection", where most likely the built-in flash light may not be properly detected. Use "Optical Cable Connection" with compatible optical cable product like "Optical D Cable Type L / Cap Set" to connect between an external strobe and camera's built-in flash.

Single Light Holder LF for Tripod

JAN code : 4562121438194

An optional product to attach single LF series LED flashlight on a tripod which is equipped with 1/4-20UNC screw or "Shoe Base 1/4-20UNC" offering various off-camera applications such as back lighting with a light attached on a tripod, fish lamp in black water diving etc. Combination with the "Shoe Base 1/4-20UNC" can install compatible light simply on an accessory shoe of an underwater housing.

Weight: 29g (1.0oz) [air] / approx.18g (0.6oz) [underwater]

Compatible LED Light

LF1300-EWf, LF3100-EW, LF800-N, LF1100-W, LF1000-S, LF2700-W, LF1400-S

LF1300-EWf on accessory shoe

LF800-N on tripod

Single Light Holder LE

JAN code : 4562121435124

Set-up image

An optional product to attach single LE series LED flashlight on a YS type arm head. Especially for handy and compact camera system set-up with Shoe Base or Grip Base D4.

Weight: 56g (2.0oz) [air] / approx.31g (1.1oz) [underwater]

Compatible LED Light

LE700-W Type2, LE700-S Type2, LE350 Type2,
LE700-W, LE700-S, LE350, LE550-W, LE550-S, LE250, LE240

Compatible arm
Directly attached

Shoe Base, Grip Base D4, D Holder, D Holder Extension Bar,
YS Adapter MV, Double YS Adapter MV, YS Adapter WB MV,
YS Adapter, YS Am MS, YS Arm M, Bar Mount,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60
Direct Base YS RT, Direct Base YS

Double Light Holder LE

JAN code : 4562121435131

Set-up image

An optional product to attach two LE series LED flashlights on a YS type arm head of the Shoe Base or Grip Base D4 in combination with the Z Joint. Pairing with the Z Adapter MV / Z Adapter II enables to attach on a ball-joint product with a clamp. Ideal for photography / videography requiring certain amount of light.

Weight: 73g (2.6oz) [air] / approx.29g (1.0oz) [underwater]

Compatible LED Light

LE700-W Type2, LE700-S Type2, LE350 Type2,
LE700-W, LE700-S, LE350, LE550-W, LE550-S, LE250, LE240

Compatible arm

Attached via optional "Z Joint"

Shoe Base, Grip Base D4, D Holder, D Holder Extension Bar,
YS Adapter MV, Double YS Adapter MV, YS Adapter WB MV,
YS Adapter, YS Am MS, YS Arm M, Bar Mount,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60,
Direct Base YS RT, Direct Base YS

Attached via optional "Z Adapter MV" / "Z Adapter II"

Arm system products equipped with a ball-joint.

Quad Light Holder LE

JAN code : 4562121435148

Set-up image

An optional product to attach two or four LE series LED flashlights on a YS type arm head of the Shoe Base or Grip Base D4 in combination with the Z Joint. Pairing with the Z Adapter MV / Z Adapter II enables to attach on a ball-joint product with a clamp.

Weight: 116g (4.1oz) [air] / approx.48g (1.7oz) [underwater]

Compatible LED Light

LE700-W Type2, LE700-S Type2, LE350 Type2,
LE700-W, LE700-S, LE350, LE550-W, LE550-S, LE250, LE240

Compatible arm

Attached via optional "Z Joint"

Shoe Base, Grip Base D4, D Holder, D Holder Extension Bar,
YS Adapter MV, Double YS Adapter MV, YS Adapter WB MV,
YS Adapter, YS Am MS, YS Arm M, Bar Mount,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60,
Direct Base YS RT, Direct Base YS

Attached via optional "Z Adapter MV" / "Z Adapter II"

Arm system products equipped with a ball-joint.

Strobe Light Holder LE

JAN code : 4562121435568

Set-up image

An optional product to attach one or two LE series LED flashlight on compatible lighting arm together with Z-330/D-200/S-2000/Z-240/D-2000 strobe etc. Directly attached on a YS type arm head like Shoe Base or Grip Base D4 in combination with the Z Joint. Pairing with the Z Adapter MV / Z Adapter II enables to attach on a ball-joint product with a clamp. Usable as lighting arm to hold LE series LED flashlight only as well.

Weight: 67.2g (2.4oz) [air] / approx.35g (1.2oz) [underwater]

Compatible LED Light

LE700-W Type2, LE700-S Type2, LE350 Type2,
LE700-W, LE700-S, LE350, LE550-W, LE550-S, LE250, LE240

Compatible strobe

Z-330, D-200, S-2000, Z-240, D-2000
D-2000S, D-2000W/Wn, D-180 (*1), D-180S
Z-220F, Z-220S (*1)

Compatible arm

Attached via optional "Z Joint"

Shoe Base (*2), Grip Base D4 (*2), D Holder,
D Holder Extension Bar, YS Adapter MV,
Double YS Adapter MV, YS Adapter WB MV,
YS Adapter, YS Am MS, YS Arm M, Bar Mount,
Port Arm for MRS, Port Arm for UFL-MR130 EFS60,
Direct Base YS RT, Direct Base YS

Attached via optional "Z Adapter MV" / "Z Adapter II" / "Z Adapter"

Arm system products equipped with a ball-joint.

(*1) There are two Arm Base design depending on production lot and only trapezoidal version can accept this product.

(*2) "Wireless Connection" is not compatible when using this product to attach an external strobe since combined LED flashlight etc. on this product may block installation/free movement of a Mirror Unit (Strobe) which is necessary for "Wireless Connection", where most likely the built-in flash light may not be properly detected. Use "Optical Cable Connection" with compatible optical cable product like "Optical D Cable Type L / Cap Set" to connect between an external strobe and camera's built-in flash.

Single Light Holder LE for Tripod

JAN code : 4562121438187

An optional product to attach single LE series LED flashlight on a tripod which is equipped with 1/4-20UNC screw or "Shoe Base 1/4-20UNC" offering various off-camera applications such as back lighting with a light attached on a tripod, fish lamp in black water diving etc. Combination with the "Shoe Base 1/4-20UNC" can install compatible light simply on an accessory shoe of an underwater housing.

Weight: 29g (1.0oz) [air] / approx.18g (0.6oz) [underwater]

Compatible LED Light

LE700-W Type2, LE700-S Type2, LE350 Type2,
LE700-W, LE700-S, LE350, LE550-W, LE550-S, LE250, LE240

Single Light Holder LE for Tripod + LE350 on tripod

Adapter for Carbon Telescopic Arm

M28 Ring Adapter(for Carbon Telescopic Arm)

JAN/EAN Code: 4570018120909

An adapter attached to a Carbon Telescopic Arm enabling to flexibly combine with a tripod system, lights, etc.

Compatible products
Arms (M28)
Carbon Telescopic Arm SS / S / M / L
Adapters (M6)
Direct Base III
Direct Base YS RT
Z Adapter MV
Adapter II
Z Joint
Others (1/4-20UNC)
Shoe Base 1/4-20UNC Head
UW 3-Way Panhead
UW Tripod Hub

Features

Tripod System
With a standard tripod configuration, it is difficult to adjust the camera position once the tripod is placed on the seabed, but with the M28 Ring Adapter (for Carbon Telescopic Arm) attached, the camera position can be easily controlled by adjusting the Carbon Telescopic Arm length.

Attaching a Direct Base III etc. allows for flexible lighting configuration.

Follow Cam System
Multiple lights can be attached on a Carbon Telescopic Arm to use more intense light for follow cam imaging.

Direct Base YS RT ｘ2
Quick Holder Set S-LF ｘ2
LF2400h-EW ｘ2

Direct Base III ｘ2
Clamp III ｘ2
YS Adapter MV ｘ2
Quick Holder Set S-LF ｘ2
LF2400h-EW ｘ2

An adapter attached to a Carbon Telescopic Arm enabling to flexibly combine with a tripod system, lights, etc.

Compatible products
Arms (M28)
Carbon Telescopic Arm SS / S / M / L
Adapters (M6)
Direct Base III
Direct Base YS RT
Z Adapter MV
Adapter II
Z Joint
Others (M1/4-20UNC)
Shoe Base 1/4-20UNC
UW 3-Way Panhead
UW Tripod Hub

Features

Attaching a Direct Base III etc. allows for flexible lighting configuration.

Follow Cam System
Multiple lights can be attached on a Carbon Telescopic Arm to use more intense light for follow cam imaging.

Direct Base YS RT ｘ2
Quick Holder Set S-LF ｘ2
LF2400h-EW ｘ2

Direct Base III ｘ2
Clamp III ｘ2
YS Adapter MV ｘ2
Quick Holder Set S-LF ｘ2
LF2400h-EW ｘ2

INON Arm System [Connecting Parts] (2024)

Clamp

Base Adapter

Joint Adapter

Light Holder

Adapter for Carbon Telescopic Arm

Clamp

Clamp III

Base Adapter

Direct Base III

Direct Base III Options

M6 Plate Direct Base III

M5 Plate Direct Base III

M6 Joint

Washer Set (Direct Base III both sides mounting)

Multi Direct Base IIa

Multi Direct Base II WB

Multi Direct Base II Long

Multi Direct Base II Options

Cap Screw Set (Multi Direct Base II both sides mounting)

Direct Base YS RT

Direct Base YS

Joint Adapter

Z Adapter MV

Z Adapter II

Z Joint

Rotatable YS Extension Bar

YS Adapter MV

YS Adapter

Double YS Adapter MV

YS Adapter WB MV

YS Adapter Options

YS Adapter Fixing Bolt

Z Adapter MV 1/4-20UNC

Z Adapter MV 1/4-20UNC Options

1/4 Male Female Tripod Screw

1/4 Male Female Tripod Screw (for Grip Base D4)

Light Holder

Single Light Holder LF

Strobe Light Holder LF

Single Light Holder LF for Tripod

Single Light Holder LE

Double Light Holder LE

Quad Light Holder LE

Strobe Light Holder LE

Single Light Holder LE for Tripod

Adapter for Carbon Telescopic Arm

M28 Ring Adapter(for Carbon Telescopic Arm)

Features

Features

Options

Carbon Telescopic Arm

Direct Base YS RT

Direct Base III

Z Adapter MV

Z Adapter II

Z Joint

UW Tripod Hub

UW 3-Way Panhead

Shoe Base 1/4-20UNC Head

References